Originally developed for coating surgical implants, microsure is the unique result of a 15-year-long research and development process by our group of experts in the field of material science and biotechnology. microsure now delivers a new standard in continuous antimicrobial protection across multiple diverse surfaces.
For hight touch objects treat every 2 weeks
For medium touch objects treat every 4 weeks
For all other areas treat quarterly
The image below is of a microsure taken using a high-powered electron microscope.The photos show our microscopic silicon dioxide particles, which create a microcrystalline-like structure. These structures covalently bond to the targeted surface, creating a new protective barrier. If harmful pathogens contact the new microsure surface, it immediately and continuously works to destroy them mechanically.
Guards against infection.
Helps reduce the spread of harmful pathogens that have the potential to cause disease.
Microsure adopts a mechanical kill method that does not require toxic chemicals to destroy
various types of microorganisms, unlike harsh chemical disinfectants.
Our environmental coating solution is fatal to many viruses, including sars cov2 plus many dangerous pathogens. microsure technology delivers a long-lasting, week after week, bio-safe surface protection solution.
In terms of infection control, "Log Reductions' tell us how effectively a product reduces
specific pathogens. The more significant the log reduction, the more effective the product is at
killing or inactivating pathogens that can cause infections. An
increment of 1 corresponds to a reduction in concentration by 10.
For example, a 0-Log reduction is no reduction at all, while a 1-log reduction corresponds to a reduction of 90 percent from the original concentration; thus, a 2-log reduction corresponds to a reduction of 99 percent from the actual concentration. So on and so forth.
Citation: BioSafety Laboratory testing: Using Microbioshield protectant (now called microSURE TM ) as a Surface Cleaner and antimicrobial agent, testing completed at FDA/CDC approved Laboratory. Results were published on October 27, 2014.
Clostridium difficile(non-spore form)
Enterobacteragglomerans (I, II)
Adenovirus Type II
Adenovirus Type IV
Bovine Adenovirus Type I
Bovine Adenovirus Type IV
Herpes Simplex Type I
Herpes Simplex Type II
Influenza A (Japan)
Influenza A2 (Aichi)
Influenza A2 (Hong Kong)
note that the above virus listed as SARS was also tested and found unsuccessful at
infecting the controlled pre-treated MlCrobioshield samples.
The reason this test result is so significant is that not only is this another virus that caused an epidemic in 2002, but it is also a member of the Coronavirus family, as is the highly infectious (COVID-19} that we are struggling to combat today.
Simian Virus 40
FDA/CDC lab results from this study once again proved that the solution prevented colonization and growth of all infectious microorganisms.
Remove any physical soiling and ensure the area is thoroughly cleaned and disinfected.
Apply microSURE TM ensuring good coverage.
Allow to air dry on hard and soft surfaces.
Our 200mI CFC-free aerosol can be used as required for top-up treatment of high touch point surfaces or equipment.
microSURE TM can also be applied using existing Nebulisation Disinfection equipment. This means facilities such as operating theatres can be disinfected and microSURE TM protected as part of the same service. microSURE TM can be applied to both hard and soft surfaces, including fabrics.
Although we have carried out independent abrasion testing, we recommend the surface protectant be re-applied every 30 to 90 days or as needed on non-contact surfaces.
High human contact surfaces should be re-applied every 2 to 4 weeks or as needed.